Classroom games on one projected board

How to run any game

1. Open the free board.
2. Add the game widget from the toolbar, then add a classroom timer — make the timer large.
3. Tell the rule before you start (who drives, how points work, when you stop).
4. Go full-screen. When the timer hits zero, stop — even mid-round.

When not to use games

• Tests and graded quizzes
• Silent reading blocks that need quiet
• Formal observation days (save games for Thursday)
• Overcrowded walls — if the timer is tiny, remove other widgets first

Block puzzle (Tetris-style)

Falling-block puzzle brain break on the projector. Arrow keys move and rotate pieces.

When to use: Use for a 3–5 minute reset after a heavy block — not during assessment or silent reading.

How to run

1. Add the block-puzzle widget and a 3–5 minute classroom timer (make the timer the largest tile).
2. Go full-screen; one student or the teacher drives with arrow keys.
3. When the timer hits zero, minimize or remove the game and return to the lesson board.

Pair with: Classroom Timer. Optional Scoreboard if you track short rounds.

Mistake to avoid: Letting the block puzzle run with no timer — the break becomes the lesson.

Keep the block puzzle as a reset, not a reward that only early finishers get. Announce the stop rule before the first piece falls so students are not surprised when you minimize the widget. If energy is still high after the timer, switch to a silent stretch or an agenda line — do not start a second round by default.

Breakout-style bricks

Paddle-and-bricks brain break. Mouse moves the paddle on the projected board.

When to use: Good for indoor recess energy or a Friday wind-down when you still need a hard stop.

How to run

1. Add Breakout plus a visible countdown (4–6 minutes).
2. Project full-screen; keep the paddle controlled from the teacher computer.
3. Stop on the timer — do not wait for a cleared level if the period is ending.

Pair with: Classroom Timer. Traffic light on yellow if noise creeps up.

Mistake to avoid: Passing the mouse around the room mid-game — lines form and the break stretches.

Breakout works best when the paddle stays on the teacher machine. Students can coach aloud at a yellow voice level, but walking the mouse around the room turns a break into a logistics problem. If the room spikes, pause the game, reset the traffic light, then resume with one minute left.

Hangman

Run hangman with the Text or Drawing widget and a timer. There is no Hangman widget on the board.

When to use: Literacy warm-ups, review of key vocabulary, or a calm end-of-period closer.

How to run

1. Set the secret word before projecting, or enter it with your back to the room.
2. Add a short timer so each guess round stays brisk.
3. Reveal the full word, then reset for a second term if time remains.

Pair with: Classroom Timer. Scoreboard for team Hangman.

Mistake to avoid: Choosing phrases students cannot spell yet — frustration kills participation.

Choose words the class has already seen in reading or content notes. For younger grades, use short high-frequency words; for older grades, use unit terms. Keep the gallows graphic secondary to the letter bank so the focus stays on spelling, not on losing.

Classroom Bingo

Call numbers and mark a projected card for whole-class bingo.

When to use: Early-finisher time, Friday fun, or a low-prep substitute activity with a hard timer.

How to run

1. Run bingo with the Names widget calling numbers and paper cards on desks. There is no Bingo widget on the board.
2. Use a timer for each round so bingo does not eat the exit ticket.
3. Celebrate one winner, reset the card, or stop when the clock ends.

Pair with: Classroom Timer. Name picker if you need a fair caller.

Mistake to avoid: Running endless rounds with no timer — transitions suffer.

Decide whether students mark paper cards or simply watch the projected card. Paper cards raise engagement; projected-only play is quieter for subs. Either way, pre-announce how many winners you will take and what happens when the timer ends.

Tic-Tac-Toe

Classic 3×3 for brain breaks or two-team review challenges.

When to use: Two-team warm-ups: correct answer earns an X or O on the board.

How to run

1. Run tic-tac-toe on the Drawing board with a Scoreboard. There is no Tic-Tac-Toe widget.
2. Ask a review question; the team that answers places a mark.
3. Cap at one or two boards with a five-minute timer.

Pair with: Scoreboard + Classroom Timer.

Mistake to avoid: Playing pure tic-tac-toe with no academic stake — keep it tied to content.

Tie every mark to a content question. Wrong answers do not earn a mark; correct answers earn placement. Two boards max keeps the competitive energy from eating the exit ticket. Project team names so arguments about whose turn it is die quickly.

Four-in-a-row

Connect four is a template, not a widget. Open the connect-four board and play from there.

When to use: Indoor recess structure or a competitive review where correct answers earn a drop.

How to run

1. Split into two teams with the group maker or table groups.
2. Correct answer → that team drops a disc; wrong answer → turn passes.
3. End on the timer even mid-board — declare closest to four if needed.

Pair with: Group Maker, Scoreboard, Classroom Timer.

Mistake to avoid: Allowing renegotiation of teams mid-game — project groups once and stick.

Project team lists once with the group maker and refuse mid-game swaps. Correct answers earn a disc; wrong answers pass the turn. If time expires mid-board, celebrate the closest column or declare a draw — the timer is the authority, not the grid.

Jeopardy-style review

Category grid with point values — structured review without another platform login.

When to use: Unit review days when you want structured competition without another platform login.

How to run

1. There is no Jeopardy widget. Put clues in the Quiz or Text widget, points on the Scoreboard, and a timer beside them.
2. Add a scoreboard for up to four teams and a round timer.
3. Click clue → discuss → reveal; move on when the timer for that clue expires.

Pair with: Scoreboard + Classroom Timer. Dice optional for random category picks.

Mistake to avoid: Writing essay-length answers — keep reveals short for the back row.

Preview font size from the back row before the first class. Short answers and short reveals keep four teams engaged. Assign a scorekeeper on the scoreboard so you are not doing mental math while facilitating clues.

Word Scramble

Unscramble letters as a class for vocab and spelling warm-ups.

When to use: Bell ringers and ELD warm-ups when you need quiet energy, not arcade noise.

How to run

1. Prepare 5–8 target words; show one scramble at a time.
2. Students write guesses; reveal when most hands are up.
3. Stop after the timer — do not chase a perfect set of ten.

Pair with: Classroom Timer. Name picker for who shares the answer aloud.

Mistake to avoid: Scrambling words students have never seen — teach first, scramble second.

Show one scramble at a time and wait for most hands before revealing. ELD classrooms benefit from saying the word aloud after the reveal so pronunciation travels with spelling. Cap the set so the warm-up stays a warm-up.

Spelling Bee

Flash a word, hide it, then spell it together on the board.

When to use: Spelling blocks and vocabulary checks without calling students to the front one by one.

How to run

1. Flash the word long enough for everyone to see, then hide it.
2. Class spells aloud or writes; check on the board.
3. Use a short timer per word so the bee stays moving.

Pair with: Classroom Timer. Scoreboard for team bees.

Mistake to avoid: Humiliating wrong spellers — treat misses as class data, not gotchas.

Flash, hide, then spell — the hide step is what makes it retrieval. Use choral spelling or mini-whiteboards so one miss is not a public spectacle. Move on after a miss; reteach the pattern later with flashcards if needed.

2048

Slide-tile number puzzle. Quiet, math-flavored brain break.

When to use: Calm resets when you want thinking without shouting — great after tests.

How to run

1. There is no 2048 widget. Use Math Blaster for a quiet number break, plus a 4–5 minute timer.
2. One driver uses arrow keys; class can coach quietly.
3. Stop on the timer even mid-merge.

Pair with: Classroom Timer. Traffic light on yellow for voice level.

Mistake to avoid: Turning it into a tournament that spans periods — one short session only.

2048 is a quiet break by design. Keep coaching whispers at yellow; if the room climbs, pause and reset expectations. One driver at a time prevents the classic “everyone mash arrows” chaos on an interactive panel.

Sequence memory

Repeat the color sequence as a class memory challenge.

When to use: Attention warm-ups and short brain breaks that build listening.

How to run

1. There is no Simon widget. Use Memory Match: the class watches a pair, then repeats it.
2. Increase sequence length slowly; reset after a miss.
3. Cap with a three-minute timer so it stays a break.

Pair with: Classroom Timer. Attention signal to start the round.

Mistake to avoid: Running sequence memory during independent work — it demands eyes on the board.

Simon demands eyes on the board, so do not run it during independent reading. Teach one miss rule: sequence resets, no arguing. Three minutes is enough for attention practice without becoming the period.

Rock Paper Scissors

Teacher vs class on the projector — five-second brain break.

When to use: Quick resets between transitions when you need something instant.

How to run

1. There is no Rock Paper Scissors widget. Keep the score on the Scoreboard while you play at the front.
2. Best of three with a one-minute timer total.
3. Return to the agenda immediately after.

Pair with: Classroom Timer or Attention Signal.

Mistake to avoid: Stretching it into a tournament bracket — keep it tiny.

Use this when you need something instant between transitions — not as a Friday tournament. Best of three, one minute total, then eyes back on the agenda. Pair with an attention signal so the return is as crisp as the break.

Memory Match

Flip pairs as a whole-class brain break or early-finisher game.

When to use: Quiet matching practice or a calm Friday closer.

How to run

1. Add Memory Match; decide if the teacher or volunteers flip tiles.
2. Set a five-minute timer; count pairs found.
3. Stop on the timer even if cards remain.

Pair with: Classroom Timer. Scoreboard for two teams.

Mistake to avoid: Letting early finishers monopolize the board while others wait — rotate drivers.

Rotate who flips tiles so early finishers do not own the board. Count pairs found if you want a light score, but end on the timer even with cards left. Quiet coaching beats shouted answers from the carpet.

Math facts blaster

Rapid-fire addition and multiplication facts on the board.

When to use: Fact fluency warm-ups — not as a graded quiz substitute.

How to run

1. Choose operation focus before projecting.
2. Reveal answers after think time; keep a brisk timer per item.
3. End after a fixed number of facts or when the clock hits zero.

Pair with: Classroom Timer. Scoreboard for team relays.

Mistake to avoid: Public shame for slow answers — use choral response or whiteboards.

Frame it as fluency practice, not a graded quiz. Prefer choral response or whiteboards so slower students are not spotlighted. Stop when the fact set or the timer ends — chasing perfect accuracy stretches the warm-up.

Typing Race

Track WPM as the class types a prompt together on the board.

When to use: Keyboarding warm-ups in labs or 1:1 rooms when the board is visible.

How to run

1. Project the prompt; one typist at the teacher computer or a volunteer.
2. Watch WPM; reset for a second round if time allows.
3. Keep a hard five-minute cap.

Pair with: Classroom Timer.

Mistake to avoid: Expecting every student to type at once without devices — this is demo/whole-class pace.

This is a demo pace tool unless every student has a device. One typist at the teacher computer keeps the projected WPM honest. Use it to model keyboarding posture and accuracy, then send students to their own keyboards if available.

Trivia

Question then reveal — build your own review deck for any subject.

When to use: Content review when Jeopardy categories feel like overkill.

How to run

1. Load Q&A pairs before class; check font size from the back row.
2. Show question → think → reveal; score with the scoreboard.
3. Stop on the period timer, not when the deck ends.

Pair with: Scoreboard + Classroom Timer.

Mistake to avoid: Reading questions too fast — pause for wait time.

Build the deck the night before and check readability. Wait time after the question matters more than speed. Score with the scoreboard and cut the deck when the period timer says so — unfinished questions can wait until tomorrow.

Crossword

Clue list with fill-in answers and a check button for quick vocabulary puzzles.

When to use: Quiet literacy or content vocab blocks.

How to run

1. Project clues; students work on paper or discuss as a class.
2. Reveal answers after the timer.
3. Discuss one tricky clue before moving on.

Pair with: Classroom Timer. Text widget for bonus definitions.

Mistake to avoid: Using crossword as a full period filler with no discussion.

Use crossword as a discussion springboard: reveal, then talk about one tricky clue. Students can work on paper while the board holds the shared answer key. Avoid using it as a silent period filler with zero talk.

Word Search

Generate a grid from your word list and check off finds as the class spots them.

When to use: Calm early-finisher work or vocab exposure — not deep learning alone.

How to run

1. Paste your word list; generate before projecting.
2. Students find words; you check them off on the board.
3. End on the timer and discuss two priority words.

Pair with: Classroom Timer.

Mistake to avoid: Treating word search as the whole vocabulary lesson.

Generate from your real word list so finds reinforce vocabulary you care about. After the timer, discuss two priority words — meaning and a sample sentence — so the search is exposure, not the whole lesson.

Classroom word guess (Wordle-style)

Custom 5-letter word game for literacy warm-ups on the smart board.

When to use: Morning literacy or vocabulary days when you control the secret word.

How to run

1. Set a curriculum-aligned secret word before students arrive.
2. Guess as a class; discuss letter feedback out loud.
3. Limit to one word with a timer so it stays a warm-up.

Pair with: Classroom Timer. Name picker for who suggests the next guess.

Mistake to avoid: Choosing obscure words nobody in the class knows — keep it teachable.

Set a curriculum-aligned five-letter word. Class discussion of letter feedback is the learning; racing to finish in two guesses is not. One word with a timer keeps the word-guess game as a literacy warm-up, not a period hijack.

Snake

Classic Snake projected for short movement-friendly breaks.

When to use: Quick brain breaks when you need something familiar and short.

How to run

1. Add Snake and a 3-minute timer.
2. One driver uses arrow keys; rotate if you run a second round.
3. Stop on the timer — high scores can wait until Friday.

Pair with: Classroom Timer.

Mistake to avoid: Competing for high scores across the whole period.

Familiar games need the same hard stop as novel ones. One driver, three minutes, then minimize. If you want competition, save high-score bragging for Friday and keep weekday breaks short.